Nike Golf Club Clones

Tour Plus Combo

(Compares To: Nike Pro Combo) Save Hundreds at Golfideas.com [NIKE Cost = $799.00 GOLFIDEAS COST = $139] This might be one of the best looking sets ever made! The Tour + Progressive iron set offers the best combination of 3 different styles in one set of irons. The low center of gravity in the long irons makes them very easy to hit and lowers the amount of twisting while striking the ball. The mid irons combine the perfect balance of playability and trajectory while enhancing feel. The short irons have the highest center of gravity to prevent ballooning and the blade design will give you optimum control. Available in 2, 3-PW & SW Right Hand Available in 3-PW & SW Left Hand

Iron	2	3	4	5	6	7	8	9	PW	SW
Loft (+-1)	18	21	24	27	31	35	39	43	47	56
Lie (+-1)	58.5	59	59.5	60	60.5	61	61.5	62	63	64
Weight (+-3)	238	244	251	258	265	272	279	286	293	300
Offset (mm)	5.0	4.5	4.0	3.5	3.3	3.0	3.0	2.5	2.5	1.5

Material 431 Stainless Steel Diameter .370 Parallel Tip Face Height (mm) Long-48 Mid-49 Short-57 Finish High Polish with Silver Cavity Pre Coned For Graphite

Tour Equalizer

Note: Sorry, these irons cannot be loft or lie adjusted!

• (Compares To: Nike Slingshot)
• Save Hundreds at Golfideas.com
  [NIKE Cost = $699.00 GOLFIDEAS COST = $139]
  

• The Tour + Equilizer irons will bring game improvement technology to the next level.
• The wide sole will produce a higher launch angle making even your long irons easy to hit.
  
• The progressive offset design will help golfers to strike the ball on a straight and accurate line.
  
• The oversize design of the blade will enhance forgiveness on golfer's miss hit shots and keep them in play.
  
• This design is perfect for players of all levels to improve their game.
  

Available in 2, 3-PW, AW, SW & LW Right Hand
Available in 3-PW & SW Left Hand

Specifications

Iron	2	3	4	5	6	7	8	9	PW	AW	SW	LW
Loft(+-1)	18	20	23	26	30	34	38	42	46	50	55	60
Lie(+-1)	58.5	59.5	60.5	61.5	62.5	63	63.5	64	64.5	64.5	65	65
Weight(+-3)	239	246	253	260	267	274	281	288	295	300	305	305
Offset(mm)	4	3.5	3.5	3	3	2	2	2	1.5	1.5	1.5	1.5

Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 48mm
Finish Gray with Black Cavity
Pre Coned For Graphite

Tour Response 650

• (Compares To: Cleveland TA6)
• Save Hundreds at Golfideas.com
  [CLEVELAND Cost = $699.00 GOLFIDEAS COST = $139]
  
  
• The Tour Response 650 iron is designed to take game improvement to the highest level.
  
• This starts by having material moved away from the cavity and moved to the sole and the perimeter of the iron.
  
• The result is a wider sole with a lower center of gravity that allows the ball to be airborne more quickly.
  
• Material has also been moved to the most extreme club head perimeter which results in increased stability and accuracy at impact.
  
• The TR 650 is also an oversized iron which creates a larger sweet spot for maximum enjoyment.
  

Available in 3-PW. SW Right Hand

Iron	3	4	5	6	7	8	9	PW	SW
Loft(+-1)	21	24	27	30	34	38	42	48	64
Lie(+-1)	59	60	60.5	61	62	63	63.5	64	64
Weight(+-3)	242	248	254	260	267	274	282	289	298
Offset(mm)	6	6	6	6	6	6	4	3.5	3

Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 48mm
Bore Depth 30mm
Finish Satin
Pre Coned For Graphite

Tour + MCD

• (Compares To: NIKE NDS)
• Save Hundreds at Golfideas.com
  [NIKE Cost = $499.00 GOLFIDEAS COST = $139]
  
  
• The Tour + MCD is the newest addition to the Tour + line of irons.
• The 431 stainless steel MCD combines qualities that golfers of all levels will find helpful.
• The progressive offset and deep cavity creates a higher launch angle which makes it easier for high handicap golfers to get the ball into the air.
• Along with helping the higher handicap golfer the progressive offset will also be helpful to the lower handicap golfer who is looking for help drawing the ball.
• The dual notch perimeter weighting along with the low center of gravity from the wide sole also makes it easier for golfers to keep the head square at impact, which will lead to straighter shots and more greens in regulation.
  
  Available in 2, 3-PW, AW, SW, LW Right Hand
  Available in 3-PW Left Hand
  

Iron	2	3	4	5	6	7	8	9	PW	AW	SW	LW
Loft(+-1)	18	21	24	27	31	35	39	43	47	51	55	59
Lie(+-1)	58	59	60	61	62	62.5	63	63.5	64	64	64	64
Weight(+-3)	235	242	249	256	263	270	277	284	291	297	300	302
Offset(mm)	5	4	4	3	3	3	1.8	1	1	1	1	.5

Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 48mm
Finish High Polish/Silver
Pre Coned For Graphite

Grand Hawk XP-9 Tour Series

• Buy today and you will receive a GolfIdeas Bestseller.
  The Grand Hawk XP-9 Tour Series iron is the player's addition in the Grand Hawk Series of irons.
• The Grand Hawk XP-9 Tour Series is designed for players who desire shot shaping ability and a slightly lower trajectory with better control.
• The XP-9 Tour Series has a thinner topline, less offset, oval back weighting and a straighter leading edge than the standard Grand Hawk XP-9.
• This model lets players work the ball without a major loss of forgiveness.
  
  Available in 3-PW, AW, SW LW Right Hand
  
  Specifications

  Iron	2	3	4	5	6	7	8	9	PW	AW	SW	LW
  Loft(+-1)	18	21	24	27	30	34	38	42	46	50	54	60
  Lie(+-1)	59	59.5	60	60.5	61	62	62	62.5	63	64	64	64
  Weight(+-3)	237	244	251	258	265	272	279	286	293	296	300	302
  Offset(mm)	3.5	3.5	3	3	2.5	2	1.5	1	.5	.5	.5	.5

  
  Material 431 Stainless Steel
  Diameter .370 Parallel Tip
  Face Height (Middle of 5 iron) 47mm
  Finish High Polish
  Hosel Depth 32mm
  Pre Coned For Graphite
  
  
  

Tour Response Vaulter Comp 460

• (Compares To: Cleveland Comp 460)
• Save Hundreds at Golfideas.com
  [Cleveland Cost = $299 GOLFIDEAS COST = $119]
  
  
• The Tour Response Vaulter Comp 460 combines the length of titanium with the ultra light weight of carbon fiber graphite and the results are longer drives off the tee.
• The beta titanium face of the Tour Response Vaulter Comp 460 produces a spring like effect that helps to propel the ball faster, thus resulting in longer drives.
• By using carbon fiber graphite in the crown of the head, weight can be redistributed to the back sole area of the driver.
• This weight at the back of the driver will help to produce a higher launch angle with less spin, which translates to more distance and roll off the tee. A great driver for golfers of all abilities.
  
  Available in 8, 9, 10, 12 Right Hand
  
  Specifications

Wood	1	1	1	1
Loft(+-1)	8	9	10	12
Lie(+-1)	59	59	59	59
Weight(+-3)	198	198	198	198
Volume(cc)	460	460	460	460
Face Height(mm)	56	56	56	56

Material 15-3-3-3 Beta Titanium with Carbon Fiber Crown
Face Angle 1 Degree Closed
Face Thickness
Diameter .335 Parallel Tip
Bulge/Roll 11"/11"
Hosel Depth 35mm
Color Black
Coned Hosel for Graphite

Integra Staff Bag (10.5 Inch)

-HUGE! 10.5 Inch Bag
-Tour Quality Size and Style
-Great for Carting with Plenty of Storage
-3 Way Full Length Dividers
-6 Zippered Pockets
-Extra Padded Carry Strap
-Towel Holder
-Umbrella Holder
-Cart Belt Loop
-Rain Hood

Integra Sooo Long Graph-Ti

• The all new Integra Sooo Long Graph-Ti is among the most technically advanced drivers on the market today.
  
• Integra has implemented a graphite crown (top of the driver) which is much lighter than titanium.
  
• This enabled Integra to take that weight and redistribute half of the weight to the entire sole and the other half to the rear heel section.
  
• This will enable golfers of all levels to get a higher launch angle and less spin for more carry and longer drives.
  
• Also, by placing the weight near the heel it will make it easier to draw the golf ball.
  
• The face on the Integra Graph-Ti is 15-3-3-3 beta titanium with spring face effect.
  
• When you combine all this technology this driver is hard to beat.
  
• This should be one of our best sellers for the 2004 season.
• Great for players of all levels, but especially helpful for players with higher handicaps.
  

Available in 7.5, 9, 10.5, 12, 14 Right Hand
Available in 9, 10.5, 12 Left Hand

Specifications

Wood	1	1	1	1	1
Loft(+-1)	7.5	9	10.5	12	14
Lie(+-1)	55	55	55	55	55
Weight(+-3)	195	195	195	195	195
Volume(cc)	400	400	400	400	400
Face Height(mm)	57	57	57	57	57

Material 15-3-3-3 Beta Titanium Face and Carbon Graphite Crown
Face Angle 1 Degree Closed
Face Thickness 2.6-2.9mm
Diameter .335 Parallel Tip
Bulge/Roll 11"/11"
Hosel Depth 36mm
Color Metallic Blue
Coned Hosel for Graphite

Integra 650cc Soolong

• Integra is once again pushing the limits of new technology!
  
• They have brought the largest titanium head we have seen to market.
  
• Our initial test have shown that this is one of the longest and straightest titanium heads we have ever tested.
  
• The ball just explodes from the face. Control was no problem and you can even work the ball with a head this size. Keep in mind because of the size, you would want to use a low torque and stiffer shaft than you normally would because the toe of the driver is further from the shaft thus it increases the torque on the shaft.
• It's a great head for all levels and clubhead speeds.
  
• You'll also need longer tees!
  

Available in 9, 10 Right Hand

Specifications

Wood	1	1
Loft (+-1)	9	10
Lie (+-1)	56	56
Weight (+-3)	200	200
Volume(cc)	650	650
Face Height(mm)	70	70

Material SP 700 Beta Titanium Face
Face Angle 2 Degree Closed
Face Thickness
Diameter 335 Parallel Tip
Bulge/Roll
Hosel Depth
Color Black w/ red blended on top of head
Coned Hosel for Graphite

Integra 550cc Soolong

• Integra has taken the titanium driver one step farther once again!
  
• The Soo Long 550cc is the one of the longest and most advanced driver we have sold yet!
  
• The SP 700 beta titanium provides the spring effect to create outstanding distance.
  
• The 550cc size makes it very accurate!
  
• The best of both worlds in one club!
  

Available 9, 10 Right Hand
Available 9, 10.5 Left Hand

Specifications

Wood	1	1	1
Loft(+-1)	9	10	10.5
Lie(+-1)	56	56	56
Weight(+-3)	198	198	198
Volume(cc)	550	550	550
Face Height(mm)	63	63	63

Material SP 700 Beta Titanium Face
Face Angle 2 Degree Closed
Face Thickness
Diameter .335 Parallel Tip
Bulge/Roll
Hosel Depth
Color Black w/ red blended on top of head
Coned Hosel for Graphite

Integra 450cc Soolong

• The all new Integra Sooo Long 450cc is a favorite among the Integra professional staff players.
  
• The 450cc size is a great blend of control and accuracy.
  
• The SP 700 beta titanium face has a fantastic feel and the ball really carries with minimal spin.
  
• Try one and you will not be disappointed!
  
• Great for players of all levels!
  

Available 7.5, 9, 10.5, 12, 14 Right Hand
Available 9, 7.5, 10.5 Left Hand

Specifications

Wood	1	1	1	1	1	1	1
Loft (+-1)	4	6	7.5	9	10.5	12	14
Lie (+-1)	56	56	56	56	56	56	56
Weight (+-3)	198	198	198	198	198	198	198
Volume(cc)	450	450	450	450	450	450	450
Face Height(mm)	62	62	62	62	62	62	62

Material SP 700 Beta Titanium Face
Face Angle 1 Degree Closed
Face Thickness 2.9-2.7mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 36mm
Color Metallic Royal Blue
Coned Hosel for Graphite

Integra Bi-Face

• Brand New Techonolgy for 2005!!
• The Integra Sooo Long Bi-Face Driver is at the pinnacle of driver technology.
  
• Here is how the technology works. The clubhead has 2 faces made of 15-3-3-3 Beta Titanium that are only 1.6mm thick. Each face is 1mm apart.
  
• When the golf ball hits the first face, the air that is trapped between the faces is compressed and the air pressure increases.
  
• The second face will then actually rebound backward and then explode forward as the ball and air pressure start forward and the results are incredible.
  
• This new technology will add distance to your driver and the feel is amazing.
  
• This is a great design for all levels of golfers.
  

Available in 7.5, 9, 10.5, 12, 14 Right Hand



Specifications

Wood	1	1	1	1	1
Loft (+-1)	7.5	9	10.5	12	14
Lie (+-1)	55	55	55	55	55
Weight (+-3)	200	200	200	200	200
Volume(cc)	450	450	450	450	450
Face Height(mm)	56	56	56	56	56

Material 15-3-3-3 Beta Titanium on Both Faces
Face Angle 1 Degree Closed
Face Thickness 1.6mm
Diameter .335 Parallel Tip
Bulge/Roll 9"/9"
Hosel Depth 36mm
Color Red
Coned Hosel for Graphite

Tour Plus Nessie

• (Compares To: Nike SasQuatch)
• With its bright yellow paint scheme and fresh look, the Tour + Nessie beta titanium driver is sure to be then envy of all the golfers in your foursome.
• By lowering the center of gravity and moving it towards the back of the club the Nessie is able to offer a larger more forgiving sweet spot than other Tour + drivers before.
• Another benefit of moving the center of the gravity is the higher launch angle that the Nessie provides.
• With a higher launch angle this club will give a drive less spin and more carry which results in LONGER DRIVES.
• The Tour + Nessie driver is a great club for golfers of all skill levels.
  
  Available in 8, 9, 10, 12, 14 Right Hand
  Available in 9, 10, 12 Left Hand
  
  Specifications

Wood	1	1	1	1	1
Loft(+-1)	8	9	10	12	14
Lie(+-1)	58	58	58	58	58
Weight(+-3)	200	200	200	200	200
Volume(cc)	460	460	460	460	460
Face Height(mm)	54	54	54	54	54

Material 15-3-3-3 Beta Titanium
Face Angle 1 Degree Closed Face
Face Thickness 2.8-2.3mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 36mm
Color Black/Yellow
Coned Hosel for Graphite

Tour Response NO-LOW

• (Compares To: Cleveland Hi-Bore)
• The unique Tour Response No-Low titanium driver lowers and deepens the center of gravity as compared to traditionally shaped drivers.
• This optimized center of gravity location aligns the sweet spot in the center of the face, which results in maximizing energy transfer with optimal launch conditions for greater length off the tee.
• Additionally, the sweet spot has been moved lower on the clubface resulting in increased distance potential.
• This is the newest technology in high launch/low spin drivers.
  

Available in 9.5, 10.5, 12.5 Right Hand

Lofts Available

9.5

10.5

12.5

Driver Lie(+-1)	57
Driver Weight(+-3)	200 grams
Driver Volume	360cc
Face Height	54mm
Face Material	9-6-4 Titanium
Face Angle	1 Degree Closed
Face Thickness	3.0-2.8mm
Diameter	.335 Parallel Tip
Bulge/Roll	10"/10"
Hosel Depth	36mm
Color	Black

Tour Zone Oil Soak (3-Wedge Set)

ONLY $89
(3) Wedge Set Special
Includes: 52.56.60 (Assembled)
RH ONLY

• This is where you really get to lower scores.
• Every bag should have a wedge set if you plan on improving your game.
• Drive for show.....chip for dough.
  

The Tour Zone 0327 Oil Soak Wedge Series features an oil soak finish that creates a unique non-glare look that players desire in today's wedges. The Oil Soak process and 3430 stainless steel makes these wedges feel very soft. Please note that over time the oil soak finish will wear resulting in a raw wedge. Spin is provided with U shaped grooves which stops wedge shots on a dime! This classically designed wedge series is great for players of all levels. Ferrule is required.

Specifications

Iron	AW	SW	LW
loft (+-1)	52	56	60
lie (+-1)	64	64	64
weight (+-3)	295	300	302
bounce	8	11	7
offset	1mm	.5mm	0mm

Material 3430 Stainless Steel Diameter .370 Parallel Tip Finish Oil Soak Pre Coned For Graphite

Tour Response Vaulter 400

• (Compares To: Cleveland Launcher 400)
• Save Hundreds at Golfideas.com
  [Cleveland Cost = $249 GOLFIDEAS COST = $89]
  
  
• The all new Tour Response Vaulter 400 is more powerful and effective than ever before.
  
• The beta titanium face incorporates a spring effect to really hit it long!
  
• The 400cc sized heads produces a higher launch angle and less spin for maximum carry.
  
• The Vaulter 400 is more playable on mis-hit drives and helps to maintain distance and accuracy even on off-center hits.
  
• If you are looking for the latest technology in drivers you need to look no further!
  
• This a great design for all skill levels.

Available 8, 9, 10, 11, 12, 13 Right Hand

Specifications

Wood	1	1	1	1	1	1
Loft(+-1)	8	9	10	11	12	13
Lie(+-1)	56	56	56	56	56	56
Weight(+-3)	198	198	198	198	198	198
Volume(cc)	400	400	400	400	400	400
Face Height(mm)	54	54	54	54	54	54

Material 15-3-3-3 Beta Titanium Face 9-6-4 Forged Ti Body
Face Angle 1 Degree Closed
Face Thickness 2.9-2.6mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 37mm
Color Gray
Coned Hosel for Graphite

Tour Response Vaulter 460

• (Compares To: Cleveland Launcher 460)
• Save Hundreds at Golfideas.com
  [Cleveland Cost = $249 GOLFIDEAS COST = $89]
  
  
• The all new Tour Response Vaulter 460 is more powerful and effective than ever before.
  
• The beta titanium face incorporates a spring effect to really hit it long.
  
• The 460cc sized heads produces a higher launch angle and less spin for maximum carry and is even more forgiving than the Vaulter 400.
  
• The Vaulter 460 is extremely playable on mis-hit drives and helps to maintain distance and accuracy even on off-center hits.
  
• If you are looking for the latest technology in drivers you need to look no further.
  
• This a great design for all skill levels and higher handicap players.

Available 8, 9, 10, 11, 12, 13 Right Hand

Specifications

Wood	1	1	1	1	1	1
Loft(+-1)	8	9	10	11	12	13
Lie(+-1)	56	56	56	56	56	56
Weight(+-3)	199	199	199	199	199	199
Volume(cc)	460	460	460	460	460	460
Face Height(mm)	56	56	56	56	56	56

Material 15-3-3-3 Beta Titanium Face 9-6-4 Forged Ti Body
Face Angle 1 Degree Closed
Face Thickness 2.9-2.6mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 34mm
Color Gray
Coned Hosel for Graphite

Tour Torch 410

• (Compares To: Nike IGNITE)
• The Tour + Torch 410cc Beta Titanium driver offers players the best of both worlds, forgiveness and length.
  
• Although these heads are 410cc, better players can still work the ball in all directions as well as hit is long and straight.
  
• The 15-3-3-3 Beta titanium face provides the spring effect to really add some "POP" to all your drives!
  
• The Tour + Torch will also help players hit the ball on a higher launch angle with less spin which helps to optimize performance.
  
• This is a great driver for all skill levels!

Available in 8, 9, 10, 11, 12, 14 Right Hand

Specifications

Wood	1	1	1	1	1	1
Loft(+-1)	8	9	10	11	12	14
Lie(+-1)	58	58	58	58	58	58
Weight(+-3)	195	195	195	195	195	195
Volume(cc)	410	410	410	410	410	410
Face Height(mm)	55	55	55	55	55	55

Material 15-3-3-3 Beta Ti Face & 9-6-4 Forged Titanium Body
Face Angle 1 Degree Closed Face
Face Thickness 2.3-2.8mm
Diameter .335 Parallel Tip
Bulge and Roll 10"/10"
Hosel Depth 36mm
Color Black
Coned Hosel for Graphite

Tour Torch 460

• (Compares To: Nike Ignite)
• The Tour + Torch 460cc Beta Titanium driver offers players the best of both worlds. forgiveness and length.
  
• Although these heads are 460cc. better players can still work the ball in all directions as well as hit is long and straight.
  
• The 15-3-3-3 Beta titanium face provides the spring effect to really add some "POP" to all your drives!
  
• The Tour + Torch will also help players hit the ball on a higher launch angle with less spin which helps to optimize performance.
  
• This is a great driver for all skill levels!
  

Available in 8. 9. 10. 11. 12. 13 and 15 Degrees Right Hand
Available in 8. 9. 10 and 12 Degrees Left Hand

Specifications

Wood	1	1	1	1	1	1	1
Loft(+-1)	8	9	10	11	12	13	15
Lie(+-1)	58	58	58	58	58	58	58
Weight(+-3)	200	200	200	200	200	200	200
Volume(cc)	460	460	460	460	460	460	460
Face Height(mm)	59	59	59	59	59	59	59

Material 15-3-3-3 Beta Ti Face & 9-6-4 Forged Titanium Body
Face Angle 1 Degree Closed Face
Face Thickness 2.3mm-2.8mm
Color Dark Blue
Bulge and Roll 10/10
Hosel Depth 36 mm
Diameter .335 Parallel Tip
Coned Hosel for Graphite

Integra 400cc

• This will be a collectors item in the near future. This is the driver that broke many barriers in driver size.
• The Integra 400cc 9-6-4 forged titanium driver was the first titanium driver we ever offered that broke the 400cc size limit!
  
• The Integra 400 titanium has an extremely large hitting surface.
  
• This helps to maintain accuracy and the spring effect face will give you the distance your looking for!
  

Available in 10.5 Right Hand
Available in 10.5 Left Hand

Specifications

Wood	1	1
Loft(+-1)	9	10.5
Lie(+-1)	56	56
Weight(+-3)	198	198
Volume(cc)	400	400
Face Height(mm)	57	57

Material 9-6-4 Forged Ti Body
Face Angle 1 Degree Closed
Face Thickness
Diameter .335 Parallel Tip
Bulge/Roll
Hosel Depth
Color Black
Coned Hosel for Graphite

Integra 400cc Offset ("Slice Killer")

• The Integra 400cc offset combines spring face technology with an offset design.
  
• This is the only Integra titanium we sell with both technologies.
  
• The offset will reduce slicing and the spring face design will get you more distance.
  
• If you're looking to fix that fade this is the head for you!

Available in 7.5, 9, 10.5 Right Hand

Specifications

Wood	1	1	1
Loft(+-1)	7.5	9	10.5
Lie(+-1)	56	56	56
Weight(+-3)	198	198	198
Volume(cc)	400	400	400
Face Height(mm)	57	57	57

Material Face 9-6-4 Forged Titanium
Face Angle 1 Degree Closed
Face Thickness
Diameter .335 Parallel Tip
Bulge/Roll
Hosel Depth
Color Black
Coned Hosel for Graphite

Inazone Premier 4

• The Inazone Premier 4 putter is the newest addition to our popular line of CNC milled putters.
• Like the rest of the Inazone Premier mallet putters, the Premier 4 is CNC milled from a single block of aluminum.
• The weight in the Premier 4 is placed in the two red areas near the heel and the toe areas of the putter, thus helping to square the putter at impact, which helps to get the ball rolling smoothly.
• While the weight is positioned near the heel and the toe it is also located near the back of the putter which helps to give this putter a feel of balance that is unparalleled and a very high moment of inertia.
• The white alignment mark located down the middle of the putter is a great visual aid to help get the putt started out on the intended line.
• The Premier 4 is a great feeling putter that will not disappoint even the best golfers.
  
  Specifications:

Weight	355 grams
Loft	3
Lie	90

Material High Grade Aluminum
Head Construction Milled From Aluminum Billet
Finish Anodized Silver

FREE Headcover included with head

Inazone Premier 3

• All of the Inazone Premier putters start out as a solid piece of aluminum.
  
• Each piece of aluminum then goes through multiple operations to obtain the final desired head shape.
  
• All of the Premier putter heads are CNC milled out of one solid piece of aluminum.
  
• Pure material consistency is the result throughout the putter head line which translates to pure, consistent performance on the green.
  
• Also, by milling the putter heads out of one single piece of material, a flatter, more perfect putter face is achieved.
  
• Overall, the Inazone Premier putter line is absolutely stunning to look at.
• Quite simply you will not be able to find any other putter out there today that posses this type of craftsmanship at the price we are offering these putters for.

The Inazone Premier 3 putter is another great addition to our new line of Premier putters. The Premier 3, just like the rest of the Premier putters is milled from a single block of aluminum, so the feel and balance of this putter is unmatched. The alignment mark on the top of the Premier 3 helps to make sure that your putts are struck in the correct spot. Behind the alignment mark is a blue circle that also helps with alignment. Under the blue circle is an internal weight that helps to balance the putter as well as give the head a smoother roll and a solid feel. The face of the Premier 3 is double CNC milled which helps to eliminate face variations while also giving the Premier 3 its precise loft. Not only a beautiful putter, but one with a great feel.

Recommended Shaft: Single Bend Putter Shaft


Specifications

Weight	328 grams
Loft	3
Lie	70

Material High Grade Aluminum with Tungsten Face Inserts
Head Construction Milled From Aluminum Billet
Finish Anodizied Black

FREE HEADCOVER WITH PURCHASE

Harrison Striper Tour 60 (Wood Only)

The Harrison Striper Tour is currently being played on all the major tours. It features the highest fiber content of any shaft in the world today. The result of which is a very tight and precise shaft that plays tip stiff but does not feel tip stiff. The 60 Series shafts works great for drivers!

Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
Regular	Mid	Mid	Clay Red/Yellow	46"	3.0	62	.335 Parallel	.610	3"
Stiff	Mid	Mid	Clay Red/Yellow	46"	3.0	62	.335 Parallel	.610	3"
X-Stiff	Mid	Mid	Clay Red/Yellow	46"	3.0	62	.335 Parallel	.610	3"

Flex Chart

Harrison Striper Tour 70 (Wood Only)

The Harrison Striper Tour is currently being played on all the major tours. It features the highest fiber content of any shaft in the world today. The result of which is a very tight and precise shaft that plays tip stiff but does not feel tip stiff. The 70 Series shafts works great for drivers and fairway woods.

Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
Regular	Mid	Mid	Clay Red/Yellow	46"	3.0	72	.335 Parallel	.620	3"
Stiff	Mid	Mid	Clay Red/Yellow	46"	3.0	72	.335 Parallel	.620	3"
X-Stiff	Mid	Mid	Clay Red/Yellow	46"	3.0	72	.335 Parallel	.620	3"

Flex Chart

Harrison Striper Tour 80 (Wood Only)

The Harrison Striper Tour is currently being played on all the major tours. It features the highest fiber content of any shaft in the world today. The result of which is a very tight and precise shaft that plays tip stiff but does not feel tip stiff. The 80 Series shafts works great for drivers and fairway woods.

Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
Regular	Mid	Mid	Clay Red/Yellow	46"	3.0	82	.335 Parallel	.620	3"
Stiff	Mid	Mid	Clay Red/Yellow	46"	3.0	82	.335 Parallel	.620	3"
X-Stiff	Mid	Mid	Clay Red/Yellow	46"	3.0	82	.335 Parallel	.620	3"

Flex Chart

UST Harmon Tour Design CB Pro 60 (Wood Only)

• New for 2006!
  
• The new HTD Counter Balance Pro series is a Tour proven winner that UST is proud to offer to custom club builders.
  
• Proven time and time again on the PGA Tour, HTD counter-balancing work extremely well for players at all levels, producing longer, straighter shots.
  
• Compare the specs with other popular shafts and you will find a superior product, and a great value.
  
• Offered in 60, 70 and 80 gram versions, this new Counter Balance Pro Series again raises the performance bar.
  
  

  Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
  Regular	Low	High	Red/Silver	46"	3.8	59	.335 Parallel	.600	4"
  Stiff	Low	High	Red/Silver	46"	3.7	60	.335 Parallel	.600	4"

  
  Flex Chart

  Flex	Driver Swing Speed (MPH)	Carry Distance (Yards)
  Regular	80-90	200-225
  Stiff	90-100	225-255

  
  

UST Harmon Tour Design CB Pro 70 (Wood Only)

• New for 2006!
  
• The new HTD Counter Balance Pro series is a Tour proven winner that UST is proud to offer to custom club builders.
  
• Proven time and time again on the PGA Tour, HTD counter-balancing work extremely well for players at all levels, producing longer, straighter shots.
  
• Compare the specs with other popular shafts and you will find a superior product, and a great value.
  
• Offered in 60, 70 and 80 gram versions, this new Counter Balance Pro Series again raises the performance bar.
  
• The 70 gram version is perfect for both drivers and fairway woods.
  
  

  Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
  Regular	Mid	Mid	Red/Silver	46"	3.4	71	.335 Parallel	.600	3.5"
  Stiff	Mid	Mid	Red/Silver	46"	3.2	71	.335 Parallel	.600	3.5"
  X-Stiff	Mid	Mid	Red/Silver	46"	3.2	72	.335 Parallel	.600	3.5"

  
  Flex Chart

  Flex	Driver Swing Speed (MPH)	Carry Distance (Yards)
  Regular	87.5-97.5	230-255
  Stiff	97.5-107.5	255-275
  X-Stiff	107.5-120	275-300

UST Harmon Tour Design CB Pro 80 (Woods Only)

• New for 2006!
  
• The new HTD Counter Balance Pro series is a Tour proven winner that UST is proud to offer to custom club builders.
  
• Proven time and time again on the PGA Tour, HTD counter-balancing work extremely well for players at all levels, producing longer, straighter shots.
  
• Compare the specs with other popular shafts and you will find a superior product, and a great value.
  
• Offered in 60, 70 and 80 gram versions, this new Counter Balance Pro Series again raises the performance bar.
  
• The 80 gram version is perfect for both drivers and fairway woods.
  
  

  Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
  Regular	Mid/High	Mid/Low	Red/Silver	46"	3.3	77	.335 Parallel	.600	4"
  Stiff	Mid/High	Mid/Low	Red/Silver	46"	3.3	81	.335 Parallel	.600	4"
  X-Stiff	Mid/High	Mid/Low	Red/Silver	46"	3.3	81	.335 Parallel	.600	4"

  
  Flex Chart

  Flex	Driver Swing Speed (MPH)	Carry Distance (Yards)
  Regular	87.5-97.5	230-255
  Stiff	97.5-107.5	255-275
  X-Stiff	107.5-120	275-300

  
  

UST Harmon Tour Design CB-65 (Wood Only)

The Harmon Tour Design 65 Series is a counter-balanced tour shaft design that really performs, adding distance and control. Lightweight, counter-balanced tour design. More flexible tip section increases ball speed and promotes a "natural draw bias" ball flight. For better players with a long, fluid swing tempo. Stronger butt section and a mid flex point provides stability in the hands and better control. This is the exact same shaft as the UST Harmon CB Series. Standard Tip Firmness for all flexes

Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
Regular	Mid	Mid	Dark Blue/Red	46"	3.3	66	.335 Parallel	.600	4"
Stiff	Mid	Mid	Dark Blue/Red	46"	3.2	68	.335 Parallel	.600	4"
X-Stiff	Mid	Mid	Dark Blue/Red	46"	3.1	69	.335 Parallel	.600	4"

Flex Chart

Inazone Prototype

• Buy Your Prototype Today
• The Inazone Prototype putter incorporates a unique design that allows weight to be shifted towards the center, heel or toe of the putter.
• All golfers have slightly different putter strokes and the Inazone Prototype allows players to customize the balance and weight of the putter head.
• Each putter arrives with two 3 gram weights (in the heel and toe) and a one 15 gram weight (in the center position).
• Additional weights included are three 5 gram and one 10 gram weight.
• The Prototype also uses a sole design to help cut down on friction which leads to missed putts.
  
  Available in Right and Left Hand
  
  Recommended Shaft: Single Bend Putter Shaft
  
  Specifications

Weight*	390 grams
Loft	4
Lie	90

*- With no weights inserted

Material: 431 Stainless Steel
Face: Polymer Insert and Brushed Silver
Finish: Brushed & Silver

Tour Plus Nessie Fairway

• The Tour + Nessie Fairway Series is designed with a high launch angle and optimum spin rates.
  
• The weighting has been moved internally to the rear which helps to improve initial launch and velocity.
  
• The wider sole print allows for greater forgiveness on mis-hit shots and the overall look and design on the Nessie breeds confidence.
  
• Comparable to the Nike® Sasquatch fairway wood
  
• Midsized head design makes the club very forgiving
  
• Low center of gravity helps to get ball airborne
  

  Available in 3+, 3wd, 4wd, 5wd, 7wd
  
  Specifications
  

  Wood	3+	3	4	5	7
  Loft(+-1)	13	15	17	19	21
  Lie(+-1)	58	58	58.5	59	59
  Weight(+-3)	210	210	215	220	225
  Volume(cc)	170	170	160	150	150
  Face Height(mm)	35	35	34	33	33

  
  Material 17-4 Stainless Steel
  Face Angle Square
  Diameter .335 Parallel Tip
  Color Black/Yellow High Polish
  Hosel Depth 33mm

Tour Response No-Low Steel

• The unique Tour Response No-Low Fairway Series lowers and deepens the center of gravity as compared to traditionally shaped fairway woods.
• This optimized center of gravity location aligns the sweet spot in the center of the face.
• Which results in maximizing MOI (Moment of Inertia) with optimal launch conditions for greater length and maximum forgiveness .
• Additionally, the sweet spot has been moved lower on the club face resulting in increased launch angle.
• This is the newest technology in fairway woods.

Specifications

Wood	3	5	7
Loft(+-1)	15	18	21
Lie(+-1)	57	58	59
Weight(+-3)	210	220	225
Volume(cc)	180	170	160
Face Height (mm)	35	35	35

Material	17-4 Stainless Steel
Diameter	.335 Parallel Tip
Face Angle	Square
Hosel Depth	32mm
Color	Black

Integra Soolong (FW)

• The Integra Soo Long Steel Fairway Series is a great addition to the very popular Integra Soo Long Series of titanium drivers.
  
• The patented sole design allows players of all levels to hit these fairway woods on a solid and straight trajectory.
• This is a fairway wood that you can hit from both the tee, rough, or fairway with optimum results and the metallic royal blue paint looks out of this world.

Available 3wd, 5wd, 7wd, 9wd & 11wd Right Hand

Specifications

Wood	3	5	7	9	11
Loft(+-1)	15	20	24	27	31
Lie(+-1)	57	58	59	60	60
Weight(+-3)	208	217	224	231	237
Volume(cc)	200	190	175	165	155
Face Height(mm)	37	36	35	34	34

Material 17-4 Stainless Steel
Face Angle Square
Diameter .335 Parallel Tip
Color Metallic Royal Blue
Coned Hosel for Graphite

Tour Lies Red Streak (FW)

• Save Hundreds at Golfideas.com
  [ADAMS Cost = $199.00 GOLFIDEAS COST = $42.50]
  
  
  
• The all new Tour Lies Red Streak Steel Fairway Wood Series is the latest in fairway wood technology.
  
• This new series is slightly larger than the original Tour Lies T-3.
  
• The bigger size makes this fairway series easier to hit from the tee and lies that are "Sitting Up."
  
• Even though they are slightly larger. the center of gravity is very low and like the previous series they are great from the toughest areas around any course.
  
• Try one. you won't be disappointed!
  

Specifications

Wood	3+	3	5	7	9	11
Loft(+-1)	13	15	19	21	24	27
Lie(+-1)	55.5	56	57	57.5	58	58.5
Weight(+-3)	205	208	215	220	225	230
Volume(cc)	189	174	164	164	151	151
Face Heights(mm)	36	36	35	35	35	35

Material 17-4 Stainless Steel
Face Angle Square
Diameter .335 Parallel Tip
Color Black
Coned Hosel for Graphite

Integra Sooo Long

• The Integra Sooo Long Hybrid series of clubs are perfect for golfers of all levels who are looking for clubs that are easier to hit than their long irons.
• The double cut sole of the Integra Sooo Long Hybrid helps to reduce friction with the turf, which results in more solid contact.
• The low center of gravity, along with a high launch angle helps to provide the ball flight you are looking for in a hybrid series.
  
  Specifications

Club	2	3	4	5	6
Loft	15	18	21	24	27
Lie	59	59.5	60	60.5	61
Weight(gr)	230	235	240	245	250

Material 17-4 Stainless Steel
Diameter .370 Parallel Tip
Face Height
Finish Translucent Blue
Hosel Depth 32mm
Pre Coned For Graphite

Inazone N-Red

• A Golfideas Favorite
• The Inazone N-Red mallet features a refined shape with adjustable weight performance features.
• Each putter arrives with a 4gram and a 8.5gram weight along with a weight tool.
• The center sightline helps the golfer to align the ball at the sweetspot.
• The Inazone N-Red also features a single bend shaft that provides the perfect flow throughout the stroke and is manufactured with a milled face for the highest quality.
  
  Recommended Shaft: Single Bend Putter Shaft
  
  Specifications

Weight	340 grams
Loft	4
Lie	90

Material: 17-4 Stainless Steel
Face: Milled
Finish: Silver

Tour Plus Steel

• A "Best Seller" at Golfideas for 2 years running!
• The Tour Plus steel wood series is in stock and is a wonderful addition to our successful Tour Plus Progressive iron.
  
• The midsize design provides plenty of forgiveness and incorporates a low center of gravity.
  
• These are woods that can be either hit from the tee, fairway, or the rough.
  
• Great for all skill levels.
  

Available 1wd, 3wd, 5wd & 7wd Right Hand

Specifications

Wood	1	1	1	3	5	7
Loft(+-1)	9	10	11	15	19	22
Lie(+-1)	55	55	55	56	57	58
Weight(+-3)	200	200	200	210	220	225
Volume(cc)	275	275	275	200	180	160
Face Height(mm)	45	45	45	38	37	36

Material 17-4 Stainless Steel
Face Angle Square
Diameter .335 Parallel Tip
Color Navy
Coned Hosel for Graphite

Inazone Ferenza

• The Inazone Ferenza allows golfers to customize the balance of the putter by inserting either a 10 gram or a 15 gram weight in the back of the head.
• By moving this much weight to the back, the Ferenza has a very solid feel at impact.
• The dual side bar technology produces a very high moment of inertia, which helps to keep the putter very straight at impact.
• A golfer's alignment is enhanced by having the horizontal bridge that connects the face to the back of the putter.
• This is a great design for all playing levels.
• Includes two weights, one weighing 10 grams and one weighing 15 grams along with a weight tool
• Requires a straight putter shaft

Weight(gr)	355 without the weights
Loft	2.5
Lie	70
Material	431 Stainless Steel
Face	Milled
Finish	Satin and Grey

Tour Response No-Low Hybrid

• The unique Tour Response No-Low Hybrid Series lowers and deepens the center of gravity as compared to traditionally shaped hybrid clubs.
• This optimized center of gravity location aligns the sweet spot in the center of the face.
• Which results in maximizing MOI (Moment of Inertia) with optimal launch conditions for greater length and maximum forgiveness .
• Additionally, the sweet spot has been moved lower on the clubface resulting in an increased launch angle for that soft landing approach shot.
• This is the newest technology in hybrid clubs.

Specifications

Club	1	2	3	4	5
Loft(+-1)	16	19	22	25	28
Lie(+-1)	58.5	59	59.5	60.5	61
Weight(+-3)	222	229	236	243	250
Face Height (mm)	33	33	33	33	33

Material	17-4 Stainless Steel
Diameter	.370 Parallel Tip
Face Angle	Square
Hosel Depth	30mm
Color	Black

Inazone I-Line

• (Compares To: Callaway I-Trax)
• The Inazone I-Line Mallet provides a terrific visual platform for aligning a putt on the proper line.
• The long white lines and middle mallet area take alignment to the next level.
• The 2 split sides provides perimeter weighting to keep the putter very sqaure at impact and this new design is engineered with a high moment of inertia at impact.
  
  Available in Right Hand
  
  Recommended Shaft: Single Bend Putter Shaft
  
  Specifications

Weight	365 grams
Loft	4
Lie	90

Material: 431 Stainless Steel
Face: Milled
Finish: Black

Inazone UB3

• (Compares To: Odyssey SRT)
• The Inazone UB3 putter is a mallet design which utilizes an outer ring technology.
• The 3-ball alignment system makes lining up putts even easier and more accurate than ever before.
• The milled stainless steel face provides a constant, extremely flat surface for accuracy while providing feedback with a positive sound.
• With a higher MOI for a straighter back stroke and follow through alolng with a stainless steel body for balance, this all-new design is an unbeatable blend of technologies.

Recommended Shaft: Single Bend Putter Shaft

Weight	390 grams
Loft	3
Lie	90

Material: 431 Stainless Steel
Face: 2-Way Milled
Finish: Grey

Inazone Z-240

• The Inazone Z-240 is an oversized mallet putter that has a very high moment of inertia and is resistance to twisting.
• The stability is provided by two very heavy tungsten weights that are positioned in the heel and toe in the rear of the putter.
• This improved weighting helps to reduce skidding for a truer roll and provides the stability on off-center putts to help keep them on their intended line.
• The putter face is milled to precise specifications to enhance accuracy and the inner sight line helps to align the clubface at address.
• Requires a straight putter shaft

Weight(gr)	380
Loft	3.0
Lie	72
Material	431 Stainless Steel
Face	Milled Polymer Insert
Finish	Black

Tour Response Vaulter Hybrid

• Replace thos hard to hit long irons and fairway woods with the Cleveland Halo clone
• The Tour Response Vaulter Hybrid is designed to replace standard long irons and produces approximately 5-10 yards longer than standard irons of equal loft.
• The Vaulter Hybrid has increased stability and a very large sweet spot that provides forgiveness for golfers of all levels.
• This is a great hybrid design to be hit from the tee, rough or the fairway

Available in 1, 2, 3, 4 Right Hand
Available in 1, 2, 3, 4 Left Hand

Specifications

Material 17-4 Stainless Steel
Diameter .370 Parallel Tip
Face Height 38mm
Hosel Depth 32mm
Color Gray/Black
Face Angle Square
Pre Coned For Graphite
Ferrule is Required

Inazone Allure

• The Inazone Allure putter positions the center of gravity in the optimal position which is behind the face where you impact the ball while putting.
  
• This transfers into terrific stability and forgiveness.
  
• This putter will also reduce "Skidding" of the ball off the face for a better roll towards the cup!

Recommended Shaft: Single Bend Putter Shaft

Specifications

Weight	350 Grams
Loft	3
Lie	90

Material: Zinc Casted
Face: Black
Finish: Black

Inazone Azur

• The Inazone Azur putter is finished in a blue iridescent finish that looks great and will turn heads on the putting green.
• The heal and toe perimeter weighting is designed to keep putts on line towards the hole.
  
• The stainless steel construction and milled face will guarantee quality.
  
• The Inazone Azur should be assembled in standard lengths.

Recommended Shaft: Straight Putter Shaft

Specifications

Weight	330 grams
Loft	3.5
Lie	72
Bounce	-1

Material: 431 Stainless Steel
Face: Milled
Finish: Iridescent Blue

Penley Tour Light (WOOD ONLY)

• A great all around driver shaft, made to promote a higher launch angle for maximum carry distance.
  
• The light weight makes it perfect for golfers of normal tempo and speed.

Flex Senior, Reg, Stiff & X-Stiff
Bend Point Senior-Mid/Low Reg-Mid Stiff-Mid/High X-Stiff-High
Color Black
Length 47 inches
Torque Senior-3.5 Reg-3.3 Stiff-3.1 X-Stiff-2.9
Weight Senior-60 R-62 S-64 X-Stiff-66
Tip Diameter .335 Parallel

Flex Chart

Flex:	Driver Swing Speed (MPH)	Carry Distance (Yards)
Senior	70-80	170-200
Regular	80-90	200-225
Stiff	90-100	225-255
X-Stiff	100-110	255-280

Inazone STO

• The Inazone STO has a smoke mirror finish that looks terrific and the playability factor that golfers expect.
  
• The heal and toe weighting and slight offset will help golfers make more putts.
  
• The STO has a classic profile and is very easy to align at your target.
  
• This is one gorgeous blade that will inspire you on any green!
  

Recommended Shaft: Straight Putter Shaft

Specifications

Weight	345 grams
Loft	2.5
Lie	72
Bounce	0

Material: 431 Stainless Steel
Face: Milled
Finish: Smoke Silver

Inazone B-3 Blade

• The best of both worlds - An alignment tool and blade design all-in-one.
  
• The Inazone B-3 Blade is the next generation in our highly successful B-3 Series.
  
• Our clients have been asking for the helpful alignment of the B-3 combined with a blade putter and we delivered.
  
• The three ball system will enable golfers of all levels to line up their putts easier than ever before.
  
• To keep putting simple, line up the three balls on the putter along your intended path on the green.
  
• This eliminates starting your ball on the wrong line.
  
• Also incorporated in this new design is a lower center of gravity that will reduce skidding of your ball on the greens.
  
• The less skidding, the better the roll, the more putts you will make.
  
• And not to be forgotten, the precise milled face incorporates a polymer insert for better feel for all putting surfaces.

Recommended Shafts: Straight Putter Shaft or Belly Putter Shaft

Specifications

Weight	390 grams
Loft	3
Lie	72

Material: 431 Stainless Steel
Face Construction: Milled Polymer Insert
Finish: Silver

Inazone B-3 Onyx

The all new Inazone B-3 Onyx Putter is sure to be the flagship of the Inazone line of putters. The three ball system will enable golfers of all levels to line up their putts easier than ever before and the black finish looks terrific. To keep putting simple, line up the three balls on the putter along your intended path on the green. This eliminates starting your ball on the wrong line. Also incorporated in this new design is a lower center of gravity that will reduce skidding of your ball on the greens. The less skidding, the better the roll, the more putts you will make! And not to be forgotten, the precise milled face incorporates a polymer insert for better feel for all putting surfaces. Recommended Shafts: Straight Putter Shaft or Belly Putter Shaft. Specifications:

Weight	390 grams
Loft	1.5
Lie	72

Material: 431 Stainless Steel Face: Milled Polymer Insert Finish: Black

Tour Plus Utility Iron

The Tour + Utility Iron is designed for players looking for a low profile & mid-size club head that can replace long irons. The Tour + has a low center of gravity that produces a higher trajectory than normal long irons. Also, this design has more mass behind the face to create more distance. This is a great design for players of all levels. Requires a .370 Parallel Tip Shaft (Iron) Specifications

Loft	18	21	24
Lie	59.5	60	60.5
Weight	213	218	223

Material 17-4 Stainless Steel Diameter .370 Parallel Tip Face Height (Middle of Face) 34mm Finish Red Pre Coned For Graphite

Inazone B-3

• Hey we all can use some help on the greens, let the B-3 save you some strokes.
  
• The all new Inazone B-3 Putter is sure to be the flagship of the Inazone line of putters.
  
• The three ball system will enable golfers of all levels to line up their putts easier than ever before.
  
• To keep putting simple, line up the three balls on the putter along your intended path on the green.
  
• This eliminates starting your ball on the wrong line.
  
• Also incorporated in this new design is a lower center of gravity that will reduce skidding of your ball on the greens.
• The less skidding, the better the roll, the more putts you will make!
  
• And not to be forgotten, the precise milled face incorporates a polymer insert for better feel for all putting surfaces.

Recommended Shafts: Straight Putter Shaft or Belly Putter Shaft

Specifications:

Weight	390 grams
Loft	1.5
Lie	72

Material: 431 Stainless Steel
Face Construction: Milled Polymer Insert
Finish: Silver

Inazone R200

• The Inazone R200 putter is one of the newest additions to the Inazone line of putters.
• The R200 has a unique shape that helps the golfer to line up a putt and get it started on the correct line.
• The center of gravity is located directly behind the ball.
• Combine that with the alignment marking on the top of the putter and striking the ball squarely should not be a problem.
• Another great putter for the Inazone line.
  
  Available in Right and Left Hand
  
  Recommended Shaft: Single Bend Putter Shaft
  
  Specifications

Weight	390 grams
Loft	3
Lie	90

Material: 431 Stainless Steel
Face: Aluminum Insert and Milled
Finish: Gray

Inazone Millan

• The Inazone Millan's distinctive mallet design makes it easier to aim the putterface and to roll the ball more accurately.
• The heavier weight of the mallet head lets the putter swing in a pendulum like motion resulting in a better stroke.
• Putting is about aiming the putter correctly and rolling the ball on the intended line and the Inazone Millan will help in that process.
  
  Available in Right Hand
  
  Recommended Shaft: Single Bend Putter Shaft
  
  Specifications

Weight	410 grams
Loft	3
Lie	90

Material: 431 Stainless Steel
Face: Milled
Finish: Gray

Inazone Oil Soak

• (Compares To: Titleist Oil Can)
• Looking for a wedge with more spin? And want some class sticking out of your bag?
• The Inazone Oil Soak Wedge Series features an oil soak finish that creates a unique non-glare look that players desire in today's wedges.
  
• The Oil Soak process and 3430 stainless steel makes these wedges feel very soft.
  
• Please note that over time the oil soak finish will wear resulting in a raw wedge.
  
• Spin is provided with U shaped grooves which stops wedge shots on a dime!
  
• This classically designed wedge series is great for players of all levels.
  

Available in AW, SW, LW Right Hand

Specifications

Iron	AW	SW	LW
Loft (+-1)	52	56	60
Lie (+-1)	64	64	64
Weight (+-3)	295	300	302
Bounce	8	11	7
Offset(mm)	1	.5	0

Material 3430 Stainless Steel
Diameter .370 Parallel Tip
Finish Oil Soak
Pre Coned For Graphite

Inazone Gun Metal

• (Compares To: Cleveland 900 Gunmetal)
• Note: These wedges cannot be loft or lie adjusted!
• The Inazone Gun Metal wedge looks as good as it plays.
• Better players prefer the gun metal finish to reduce glare while the 8620 mild steel is as soft as butter!
• Play like the pros and get more birdies from inside 100 yards.

Available in AW, SW, LW Right Hand
Available in AW, SW, LW Left Hand

Specifications

Iron	AW	SW	LW
Loft(+-1)	52	56	60
Lie(+-1)	64	64	64
Weight(+-3)	296	300	308
Bounce	9	14	12
Offset(mm)	1	.5	0

Material 8620 Stainless Steel
Diameter .370 Parallel Tip
Finish Gun Metal
Pre Coned For Graphite

Inazone Century

• (Compares To: Callaway Tour Blue)
• Put some brag back in your bag! This wedge will turn some heads around the greens.
• The Inazone Century Wedge Series will draw attention from your playing partners.
  
• The blue iridescent finish looks great and the soft steel will provide plenty of spin and accuracy.
  
• This is a great wedge for all playing levels and can be used from all areas of the course.
  

Available in PW, AW, SW, LW Right Hand

Specifications

Iron	PW	AW	SW	LW
Loft(+-1)	48	52	56	60
Lie(+-1)	64	64	64	64
Weight(+-3)	295	295	305	305
Bounce	5	7	11	7
Offset(mm)	0	0	0	0

Material 3430 Stainless Steel
Diameter .370 Parallel Tip
Finish Iridescent Blue
Pre Coned For Graphite

Inazone 1 DFX

• The Inazone I putter incorporates 304 soft stainless steel with a milled face to provide terrific feel and results on any green.
  
• The Polymer insert also softens the feel giving players better feedback.
  
• The cavity design provides a solid platform for all putting styles.
  
• The Inazone I is designed for standard length putters.
• Get "Inazone" and make more putts!

Recommended Shaft: Straight Putter Shaft

Specifications

Weight	320 grams
Loft	3
Lie	70
Bounce	-3

Material: 304 Soft Steel
Face: Polymer Insert and Milled
Finish: Black Shot Bead

Inazone SX

• The Inazone SX provides superior control and feel to improve your putting.
  
• The soft 304 stainless steel and milled face feels as good as any $125.00 putter!
  
• The center shafted design is also great for making belly & long putters.
  
• Get "Inazone" and make more putts!

Recommended Shafts: Straight, Long, or Belly Putter Shaft

Specifications

Weight	410 grams
Loft	3
Lie	79

Material: 304 Soft Steel
Face: Milled
Finish: Silver

Inazone SCN

• The Inazone SCN has a classic design that is perfect for golfers of all levels.
  
• The offset putter helps golfers to better align putts.
  
• The perimeter weighting makes the Inazone SCN very forgiving.
  
• The Inazone SCN has been casted in a 304 soft stainless steel to enhance feel.

Recommended Shaft: Straight Putter Shaft

Specifications

Weight	340 grams
Loft	3
Lie	72
Bounce	-1

Material: 304 Soft Steel
Face: Milled
Finish: Shot Bead

Inazone SB-1

The Inazone SB-1 putter has reworked the idea of heel and toe weighting. The end result is very solid feel and a tremendous amount of forgiveness. The design of the SB-1 is conducive to building this head in either a standard or belly length putter. The milled face and polymer insert will enhance the SB-1's feel and control on even the toughest greens. Recommended Shafts: Straight Putter Shaft Specifications

Weight	390 grams
Loft	4
Lie	72
Bounce	1

Material: 431 Stainless Steel Face: Polymer Insert and Milled Finish: Silver

Inazone BL-1

The Inazone BL-1 putter incorporates 431 stainless steel with a milled face to provide a solid and true feel. You can use this design for standard putter if you are looking for a very heavy feel. The cavity design allows for maximum forgiveness even on miss hit putts. Recommended Shafts: Straight Putter Shaft Specifications

Weight	420 grams
Loft	3
Lie	81
Bounce	1

Material: 431 Stainless Steel Face: Milled Finish: Silver

Inazone H-4

• Looking for a putter that's easy to line up and rolls more consistent.
• The Inazone H-4 is a mallet design that provides outstanding features for all players.
• The "Blue" insert on the milled face provides a solid feel and improves feedback.
• The 2 alignment marks on the sole also makes the Inazone H-4 easier to align.
• Try one and make more putts!
  
  Recommended Shaft: Straight Putter Shaft

Specifications

Weight	340 grams
Loft	4
Lie	72
Bounce	-1

Material: 304 Stainless Steel
Face: Blue and Milled
Finish: Silver

Inazone N87

• The Inazone N87 incoporates a precision milled face that creates a pleasing feel and sound.
  
• The milling also creates a perfect and face flat surface for accuracy on the greens.
  
• Additional perfomance comes from the increased perimeter weighting and alignment marks to help you sink more putts!
  
• The Inazone N87 should be made into standard lengths.

Recommended Shaft: Straight Putter Shaft

Specifications

Weight	340 grams
Loft	4
Lie	72
Bounce	-1

Material: 431 Stainless Steel
Face: Milled
Finish: Black Shot Bead Finish

Inazone Rusty

• (Compares To: Cleveland RTG Rusty)
• The Inazone 8620 Rusty wedge looks as good as it plays.
  
• Better players prefer the qualities of the 8620 Stainless Steel unplated steel which will develop a "rusty" finish over time.
  
• This creates more spin and controlled play.
  
• Play like the pros and get more birdies from inside 100 yards!
  

Available in AW, SW, LW Right Hand
Available in AW, SW, LW Left Hand

Specifications

Iron	AW	SW	LW
Loft(+-1)	52	56	60
Lie(+-1)	64	64	64
Weight(+-3)	296	300	308
Bounce	9	14	12
Offset(mm)	1	.5	0

Material 8620 Stainless Steel
Diameter .370 Parallel Tip
Finish Rust Process
Pre Coned For Graphite

Inazone DT20

• The Inazone DT 20 Wedge Series offers a soft and solid feel with weight distribution in the optimal areas.
  
• The DT 20 offers a deeper center of gravity that results in a more solid feel and efficient strike of the ball.
  
• The traditional shape, soft 3430 stainless steel and low glare satin finish makes this series ideal for all playing levels.

Available in AW, SW, LW Right Hand

Specifications

Iron	AW	SW	LW
Loft(+-1)	52	56	60
Lie(+-1)	64	64	64
Weight(+-3)	300	300	310
Bounce	11	12	8
Offset(mm)	0	0	0

Material 3430 Stainless Steel
Diameter .370 Parallel Tip
Finish Glass Bead Satin
Pre Coned For Graphite

Inazone "Low Bounce" Wedge

• Looking for a wedge with almost NO BOUNCE?? The Inazone "Low Bounce" is what your game needs then.
• The Inazone Low Bounce Wedge Series is perfect for golfers with shallow angles of attack or players looking for a wedge that allows precise play from tighter lies.
• The traditional and classic shape gives players of all abilities the confidence to hit any type of golf shot.
• The combination of soft stainless steel and U-grooves makes it easy to hit those shots that stop quickly on the green.
  
  Available in AW, SW, LW Right Hand
  
  Specifications

Iron	AW	SW	LW
Loft(+-1)	50	55	60
Lie(+-1)	64	64	64
Weight(+-3)	305	305	305
Bounce	2	4	2
Offset(mm)	1.5	.5	0

Material 8620 Stainless Steel
Diameter .370 Parallel Tip
Finish Brushed Silver
Pre Coned For Graphite

Orbitor 50 Tour X (WOODS ONLY)

• The Orbitor 50 is a high quality 50 inch shaft designed for players looking to make extreme drivers.
  
• The stiff tip and higher bend point provides the tools that stronger and long hitting players are looking for in today’s shafts.
  
• This shaft should only be purchased if you are going to make a driver of at least 47 overall inches.

Flex Reg, Stiff, X-Stiff XX-Stiff & XXX-Stiff
Bend Point Mid/High
Color White
Length 50 inches
Torque 3.9
Weight R-66 S-69 X-76 XX-79 XXX-82
Tip Diameter .335 Parallel



Flex Chart

Flex:	Driver Swing Speed (MPH)	Carry Distance (Yards)
Regular	85-95	210-230
Stiff	95-105	230-260
X-Stiff	105-115	260-290
XX-Stiff	115-125	290-320
XXX-Stiff	125-135	320-350

FGS Tour Launch 65 Wood

Compares To: Grafalloy Prolaunch 65) The FGS Tour Launch 65 wood shaft is the newest addition to our FGS line of wood shafts. The Tour Launch 65 is made from the highest quality filament wound graphite. By combining a low bend point and a high launch angle the Tour Launch 65 will help golfers to get the ball up in the air. A great light weight shaft at a great price.

Available Flexes	Bend Point	Launch Angle	Color	Length	Torque	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
Senior	Low	High	Silver	46"	3.5	65	.335 Parallel	.605	4"
Regular	Low	High	Silver	46"	3.5	66	.335 Parallel	.605	4"
Stiff	Low	High	Silver	46"	3.5	67	.335 Parallel	.605	4"
X-Stiff	Low	High	Silver	46"	3.5	68	.335 Parallel	.605	4"

Flex Chart

Tour + Wedge 52* (Closeout #23)

-There is only 1 left of all of our Closeouts.
-These were all orders that were built by mistake
-IT HAS TO GO!!!! ONLY $25

Wedge Specs
-Tour +Wedge 52* RH
-w/FGS Graphite shaft
-Winn Tan Grip
-Std Length
-ASSEMBLED AND READY TO SHIP!!

• BUY NOW AND SAVE $5.70 FROM THE RETAIL PRICE

RETAIL PRICE $30.70OUR PRICE $25

LH Inazone Gunmetal 52* (Closeout #25)

There is only 1 left of all of our Closeouts.
-These were all orders that were built by mistake
-IT HAS TO GO!!!! ONLY $25

Wedge Specs
-LH Inazone Gunmetal 52*
-w/DT Lite Stiff
-Pro T Vibration
- +1/2" over Standard
-ASSEMBLED AND READY TO SHIP!!

• BUY NOW AND SAVE $5.97 FROM THE RETAIL PRICE

RETAIL PRICE $30.97
OUR PRICE $25

Available Flexes	Bend Point	Launch Angle	Length	Weight (gr)	Tip Diameter	Butt Diameter	Parallel Tip Section
Lady/Senior	Low	High	42"	119	.370 Parallel	.580	17.5"
Regular/Stiff	Mid	Mid	41"	127	.370 Parallel	.600	12"

Inazone DT 1100

• The Inazone DT 1100 wedge series feature a slightly larger sole, extra stability and forgiveness.
• Weight is redistributed to the perimeter of the clubhead that helps you maintain your clubhead stability through impact, even on off-center hits.
• No matter what level of golfer you are, these wedges will help you get up and down from all areas of the course and like the entire Inazone line of wedges, it's designed with quality you can count on.

Available in AW, SW, LW Right Hand

Iron	AW	SW	LW
Loft(+-1)	52	56	60
Lie(+-1)	64	64	64
Weight(+-3)	300	300	300
Bounce	8	12	10
Offset(mm)	0	0	0

Material 431 Stainless Steel
Diameter .370 Parallel Tip
Finish Satin & Black

Integra Soft Cast

• (Compares To: Cleveland 900 Chrome)
• The Integra Soft Cast wedge provides a terrific platform for all of your short iron needs.
  
• The 18-8 stainless steel construction, classic styling and solid feel have made this one of our most popular wedges for the upcoming season.
  
  Available in AW, SW, LW Right Hand
  Available in AW, SW, LW Left Hand
  
  Specifications

  Iron	AW	SW	LW	LW
  Loft (+-1)	52	56	60	64
  Lie (+-1)	65	65	65	65
  Weight (+-3)	302	302	302	302
  Bounce	5	12	3	2
  Offset(mm)	0	0	0	0

  
  Material 18-8 Stainless Steel
  Diameter .370 Parallel Tip
  Finish Mirror
  Pre Coned For Graphite
  
  

Inazone Signature Series

(Compares To: Cleveland 900) Need an affordable wedge you can use from all types of lies? This is the wedge for you. Golfideas is very proud to bring you our Inazone Signature Series Wedges. The classic high toe and shallow heel design along with a high polish finish looks great and is designed for all playing levels. Available in AW, SW, LW Right Hand Available in AW, SW, LW Left Hand Specifications

Iron	AW	SW	LW
Loft(+-1)	52	56	60
Lie(+-1)	64	64	64
Weight(+-3)	296	300	308
Bounce	9	14	12
Offset(mm)	1	.5	0

Material 431 Stainless Steel Diameter .370 Parallel Tip Finish High Polish Pre Coned For Graphite

Golfideas "Official Tour Member" Shirt

• We know that you guys like to show off your savings on the course from Golfideas
• Now you can show off your clubs off the course with the Golfideas "Official Tour Member" shirt.
• And at these prices you can afford to purchase one in long sleeve and short sleeve.

• Available in: Medium, Large, X-Large, XX-Large
• Available in: Long Sleeve and Short Sleeve

OUT OF STOCK

Tour + Titanium Headcover

• Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
• This high quality Tour + Beta Titanium headcover will do the job and will add flavor to any golf bag.
• Fits up to a 460cc size driver and looks great on our Tour + Titanium Drivers.

Tour + Steel Headcover

• Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
• These high quality Tour + fairway headcovers (For all Tour + Steel Models) will do the job and they will add flavor to any golf bag.
• Fits all Tour + Steel Woods. Includes tags for 1wd, 3wd, 5wd, 7wd and 9wd.

Tour + Nessie Driver Headcover

• Don't take chances with damaging your woods by not using a headcover.
• This high quality Tour + Nessie Titanium headcover will do the job and will add flavor to any golf bag.
• Fits up to a 460cc size driver and looks great on our Tour + Nessie Titanium Drivers.

Tour + Nessie Fairway Headcover

• Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
• These high quality Tour + Nessie Fairway headcovers will do the job and they will add flavor to any golf bag.
• Fits all Tour + Steel Woods.
• Includes tags for 3wd, 4wd, 5wd, and 7wd.

Tour Response Driver Headcover

• Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
  
• This high quality Tour Response Beta Titanium headcover will do the job and will add flavor to any golf bag.
  
• Fits the 320cc, 400cc & 460cc size driver and looks great on our Tour Response Vaulter Beta Titanium Driver Series.

Tour Response Fairway Headcover

• Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
  
• These high quality Tour Response Fairway headcovers (For all Tour Response Steel Models) will do the job and they will add flavor to any golf bag.
  
• Fits all Tour Response Steel Woods.

Inazone B-3 Headcover

• Don't let dings in your putter make you hide your new stick from your friends.
  
• Don't take chances with damaging your Inazone B-3 putter by not using a proper headcover.
  
• The suede outer cover and padded inside will ensure that you B-3 stays in top form.
  
• We highly suggest that you use a headcover with your B-3 due to the size and gram weight of the putter design.
• Available for either a right hand or left hand model.
  

Inazone Mallet Headcover

• Fits (ALL) RH and LH Inazone mallet models.

Don't take chances with damaging your Inazone mallet putter by not using a proper headcover. The suede outer cover and padded inside will ensure that your Inazone stays in top form. We highly suggest that you use a headcover with your mallet due to the size and gram weight of the putter design.

Inazone Leather Blade Headcover

• Don't take chances with damaging your Inazone putter by not using a proper headcover.
  
• The fur lined inside and leather outside ensures the highes quality and protection.
  
• Fits all Inazone blade putters!

Golf Pride Tour Velvet Half Cord

Number one choice of Tour players. Computer-designed, non-slip surface pattern for a soft, non-abrasive feel, enhanced comfort and "grabby surface" - ideal for all gripping conditions. The 1/2 cord adds extra hold under the toughest conditions.

Weight 52 grams
Core Size .580 Round
Color Black

Golf Pride Tour Wrap Full Cord

Soft, tacky rubber compound in a simulated-leather design for greater grip comfort and control. Cord Material ensures consistent high playability with all-weather performance, control and power.

Weight: 54 grams
Core Size: .580 Round
Color: Black with Cord

Golf Pride Tour Velvet Jumbo

Number one choice of Tour players. Computer-designed, non-slip surface pattern for a soft, non-abrasive feel, enhanced comfort and "grabby surface" - ideal for all gripping conditions.

Weight: 61 grams
Core Size: .600 Round
Color: Black
+ 1/8" oversize

Golf Pride Tour Velvet Midsize

Number one choice of Tour players. Computer-designed, non-slip surface pattern for a soft, non-abrasive feel, enhanced comfort and "grabby surface" - ideal for all gripping conditions.

Weight: 53.5 grams
Core Size: .600 Round
Color: Black
+ 1/16" oversize

Golf Pride Tour Wrap Midsize

Soft, tacky rubber compound in a simulated-leather design for greater grip comfort and control.

Weight: 60 grams
Core Size: .600 Round
Color: Black
+ 1/16" oversize

Golf Pride Tour Velvet

Number one choice of Tour players. Computer-designed, non-slip surface pattern for a soft, non-abrasive feel, enhanced comfort and "grabby surface" - ideal for all gripping conditions.

Weight: 51.5 grams
Core Size: .580 Ribbed

Golf Pride Tour Wrap Lady

Soft, tacky rubber compound in a simulated-leather design for greater grip comfort and control.

Weight: 47.5 grams
Core Size: .560 Round
Color: Black

Golf Pride Tour Wrap

Soft, tacky rubber compound in a simulated-leather design for greater grip comfort and control. One of our best sellers.

Weight: 52.5 grams
Core Size: .580 Round
Color: Black

Pro T Tour Standard

The Tour Standard has the most "tacky" feel in the Pro T line of grips. The soft feel and high performance make it one of our best sellers!

Weight: 51 grams
Core Size: .600

• ø Golf Club Clones are Better ø
• Callaway Golf Club Clones
• Cleveland Golf Club Clones
• Nike Golf Club Clones
• Taylormade Golf Club Clones
• Ping Golf Club Clones
• Hot Deals
• Cobra Brand Clones
• Titleist Brand Clones