Taylormade Golf Club Clones
Turner T-2
Golfideas.com beats Taylormade© to the punch with the "New Turner T-2" adjustable weight irons.
- The Turner T2 iron is taking iron technology to the next level. Seeing how well adjustable weighted drivers and fairway woods have been received by golfers, Golfideas decided to design an iron with the same technology.
- The T2 has two adjustable weights located on the back of the iron that can be changed around to help a player shape their shots.
- The T2 has a deep cavity along with a low center gravity to help golfers with higher handicaps make better contact with the ball.
- The T2 iron comes with two interchangeable four gram weights in each head.
- Also included with each head is another two weights, one weighing two grams and the other six grams.
- By experimenting with these weights a golfer can find the correct setup for their iron game.
- The Turner T2 is a great iron head for high handicap golfers.
- Each set also comes with a wrench to remove and tighten the weights.
Available in 3-PW, SW Right Handed
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | SW |
| Loft(+-1) | 20 | 23 | 26 | 29 | 33 | 37 | 41 | 45 | 55 |
| Lie(+-1) | 59.5 | 60.5 | 61.5 | 62 | 62.5 | 63 | 63.5 | 64 | 64 |
| Weight(+-3) | 245 | 251 | 258 | 265 | 272 | 279 | 286 | 293 | 300 |
| Offset(mm) | 5.5 | 5 | 4.5 | 4 | 3.5 | 3 | 2.5 | 2 | 1.5 |
Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 49mm
Finish High Polish
Hosel Depth 35mm
A 2 and 6 Gram Weight and Tool is included with each set
Pre Coned For Graphite
Turner TCE Combo Set
- If you’re a high handicapper and you struggle to hit your long irons, the Turner TCE Combination set is the answer you’ve been looking for. In this set the 3 and 4 irons have been replaced with the very popular 3 and 4 Turner Emergency hybrid utility clubs.
- The Turner Emergency hybrid clubs are much easier to hit than traditional long irons due to their low center of gravity and high moment of inertia.
- The 5 iron through the pitching wedge in this set are the Turner TCE irons.
- The TCE irons have a deep cavity and a low center of gravity, so players that struggle to get the ball in the air will find it easier to hit the ball in the air along with hitting the ball straighter.
- This is also a great set of clubs for a senior or a beginning golfer due to the forgiveness all the clubs in the set offers.
Available in 3-PW, AW, SW, LW Right Hand (3 & 4 are in the Hybrid Design)
| Iron | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW |
| Loft(+-1) | 22 | 25 | 27 | 31 | 35 | 39 | 43 | 47 | 51 | 55 | 59 |
| Lie(+-1) | 59 | 59.5 | 60.5 | 61 | 61.5 | 62 | 62.5 | 63 | 63 | 63 | 63 |
| Weight(+-3) | 215 | 220 | 256 | 263 | 270 | 277 | 284 | 292 | 296 | 300 | 304 |
| Offset(mm) | 0 | 0 | 6 | 6 | 5 | 5 | 4 | 3 | 2 | 2 | 2 |
For the Turner TCE 5-LW
Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 49mm
Finish High Polish
Hosel Depth 32mm
Pre Coned For Graphite
Ferrule is Required
For the Turner Emergency Hybrid 3 & 4
Material 17-4 Stainless Steel
Diameter .370 Parallel Tip
Face Height 34mm
Finish Silver/Black
Pre Coned For Graphite
Ferrule is Required
Turner TCE
(Compares To: Taylormade CGB)
- Save Hundreds at Golfideas.com
[TAYLORMADE Cost = $699.00 GOLFIDEAS COST = $139]
- The Turner TCE iron offers players the great combination of distance. control and forgiveness.
- The cavity in the TCE offers a deep and low center of gravity.
- This allows players of all abilities to hit the ball on the correct line with the correct trajectory.
- The Turner TCE Iron will be one of our best for the 2005 season.
Available in 2. 3-PW, AW, SW, LW Right Hand
| Iron | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW |
| Loft(+-1) | 18 | 21 | 24 | 27 | 31 | 35 | 39 | 43 | 47 | 51 | 55 | 59 |
| Lie(+-1) | 59 | 59.5 | 60 | 60.5 | 61 | 61.5 | 62 | 62.5 | 63 | 63 | 63 | 63 |
| Weight(+-3) | 237 | 242 | 249 | 256 | 263 | 270 | 277 | 284 | 292 | 296 | 300 | 304 |
| Offset(mm) | 8 | 8 | 7 | 6 | 6 | 5 | 5 | 4 | 3 | 2 | 2 | 2 |
Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 49mm
Finish High Polish
Hosel Depth 32mm
Pre Coned For Graphite
Turner "SBD" Irons
- The Turner SBD iron series is a clubhead that can do it all.
- The Turner SBD is very forgiving and provides great feel and power.
- The feel is enhanced by placing a polymer cartridge in the sole to help dampen impact vibrations.
- The Turner SBD has a perimeter weighting system that allows the long irons to be hit high and straight and the short irons to be struck dead on the flag.
- If you are looking for an iron that can be worked both directions and still have the playability on miss hits you have found the right club.
- This iron is great for all playing levels. Ferrule is required.
Available in 2, 3-PW, AW, SW & LW Right Hand
Specifications
| Iron | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW |
| Loft(+-1) | 18 | 20 | 23 | 27 | 31 | 35 | 39 | 43 | 47 | 51 | 55 | 60 |
| Lie(+-1) | 59 | 60 | 60.5 | 61 | 61.5 | 62 | 62.5 | 63 | 63.5 | 64 | 64 | 64 |
| Weight(+-3) | 235 | 242 | 249 | 256 | 263 | 270 | 278 | 286 | 294 | 299 | 302 | 303 |
| Offset(mm) | 4 | 3.5 | 3 | 3 | 2.5 | 2 | 1.5 | 1 | .5 | .5 | .5 | .5 |
Material 431 Stainless Steel
Diameter .370 Parallel Tip
Face Height (Middle of 5 iron) 48mm
Finish Gray
Pre Coned For Graphite
Turner Max Launch (5-PW)
- The Turner Max Launch iron incorporates 2 piece head technology that allows for a super deep cavity and a very low center of gravity.
- The sole of the Max Launch incorporates dual side internal weighting that helps to keep the iron head sqaure at impact.
- The face on the Turner Max Launch is casted in an ultra thin stainless steel design that maximizes distance.
- Overall these technologies result in a high launch iron that has maximum playability for all golfing levels.
| Iron | 5 | 6 | 7 | 8 | 9 | PW | AW | SW | LW |
|---|---|---|---|---|---|---|---|---|---|
| Loft(+-1) | 23 | 26 | 30 | 34 | 39 | 44 | 49 | 54 | 59 |
| Lie(+-1) | 62 | 62.5 | 63 | 63.5 | 64 | 64.5 | 64.5 | 64.5 | 64.5 |
| Weight(+-3) | 256 | 263 | 270 | 277 | 284 | 291 | 297 | 300 | 302 |
| Offset(mm) | 5.3 | 5.0 | 4.7 | 4.3 | 4.0 | 3.7 | 3.7 | 1.0 | 1.0 |
| Material | 431 Stainless Steel |
| Face Height middle 5 iron | 49mm |
| Diameter | .370 Parallel Tip |
| Hosel Depth | 35mm |
| Finish | High Polish |
Turner EW-3
- The Turner EW-3 460 features an extra large 460cc club head that has the highest moment of inertia of any of our Turner Series drivers. That means tremendous forgiveness and long, straight results on off-center hits. The larger footprint allows for a higher launch angle with less spin for maximum distance. The opti-weight technology allows you to customize the ball flight to suit your game. The Turner EW-3 comes with two 2 gram weights and one 8 gram weight preinstalled.
- Comparable to the TaylorMade® r7 460 driver
- Each head comes with 2 two gram weights and 1 eight gram weight preinstalled along with 1 six gram weight, and 1 ten gram weight
- Each head comes with a wrench to remove and tighten weights
| Lofts Available | 8 | 9 | 10 | 12 | 14 |
| Driver Lie(+-1) | 57 |
| Driver Weight(+-3) | 200 grams |
| Driver Volume | 460cc |
| Face Height | 58mm |
| Face Material | SP 700 Beta Titanium |
| Face Angle | 1 Degree Closed |
| Face Thickness | 2.8-2.3mm |
| Diameter | .335 Parallel Tip |
| Bulge/Roll | 10"/10" |
| Hosel Depth | 35mm |
| Color | Black |
Turner T-3 (Offset)
- The Turner T-3 Offset Beta Titanium Driver offers the newest technology that is sweeping the world of drivers, adjustable weighting.
- The 450cc Turner T-3 allows golfers to optimize distance, direction and trajectory.
- The T-3 helps to cut down on a golfers slice by using two different things.
- Obviously the offset helps to cut down on slice.
- Also, by moving the weights from the toe of the driver to the heel of the driver this will help golfers who struggle with a slice to close the face at impact which also will help on reducing a golfer’s slice.
- The SP 700 beta titanium face of the Turner T-3 posses the spring effect to help launch your ball to distances most golfers aren’t used to.
- The direction and the trajectory are determined by how the golfer places the 3 adjustable and interchangeable weights located on the heel and the back of the head.
- The Turner T-3 also comes with extra weights of differing amounts which can be moved around until you find the perfect set up for your game.
- Don’t be left behind the times, get an adjustable weighted driver before you’re the last one in your foursome to have one.
NOTE
To help draw the golf ball put the heavier weights near the heel.
To increase the launch angle put the heavier weights in the back section.
Also, by removing the weights from the toe of the driver and doubling up the weight in the heel of the driver this will make it that much easier for golfers who struggle with a slice to close the face of the driver at impact which also will help on reducing a golfer’s slice.
Available in 9, 10, 12, 14, 16 Right Hand
Specifications
| Wood |
|
|
| 1 | 1 |
| Loft(+-1) | 9 | 10 | 12 | 14 | 16 |
| Lie(+-1) | 59 | 59 | 59 | 59 | 59 |
| Weight(+-3) | 201 | 201 | 201 | 201 | 201 |
| Volume(cc) | 450 | 450 | 450 | 450 | 450 |
| Face Height(mm) | 60 | 60 | 60 | 60 | 60 |
Includes Two .5 gram, One 4 gram, One 6 gram, One 8 gram weights and one weight tool.
Material SP 700 Beta Titanium
Face Angle 1 Degree Closed and Offset
Face Thickness 2.8-2.3mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 36mm
Color Black
Coned Hosel for Graphite
Turner T-5 (400cc)
(Compares To: Taylormade R7)
- Save Hundreds at Golfideas.com
[Taylormade Cost = $299 GOLFIDEAS COST = $109]
- The heritage of the Turner Beta Titanium Series of drivers continues with the Turner T-5.
- The Turner T-5 incorporates the latest technology to optimize distance, direction and trajectory.
- The SP 700 Beta Titanium face offers the latest technology in variable face thickness to maximize drives.
- The next technology allows players to optimize the driver with a weight configuration that is best for each player's game.
- The Turner T-5 arrives with 5 tungsten and aluminum weights already inserted in the driver.
- Two weights each weighing .5 grams and three weights each weighing 4 grams are inserted with each driver.
- The Turner T-5 also comes with additional 6 gram and 8 gram tungsten weights.
- The possibilities are endless in ways golfers can align weights to optimize trajectory and direction.
- Also included with each head and weight package is a tool that is used to remove and insert weights.
Periodically it is recommended that you check the weights to make sure they have not loosened during golfing.
Available in 8, 9, 10, 12, 14 Right Hand
Available in 9, 10, 12 Left Hand
Specifications
| Wood |
|
|
| 1 | 1 |
| Loft(+-1) | 8 |
| 10 | 12 | 14 |
| Lie(+-1) | 59 | 59 | 59 | 59 | 59 |
| Weight(+-3) | 200 | 200 | 200 | 200 | 200 |
| Volume(cc) | 400 | 400 | 400 | 400 | 400 |
| Face Height(mm) | 58 | 58 | 58 | 58 | 58 |
Material SP 700 Beta Titanium
Face Angle 1 Degree Closed
Face Thickness 2.8-2.3mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 36mm
Color Black
Coned Hosel for Graphite
Turner T-4 (450cc)
(Compares To: Taylormade R5)
- Save Hundreds at Golfideas.com
[Taylormade Cost = $249 GOLFIDEAS COST = $109]
- Looking for that R7 style driver but with a more forgiving face? The Turner T-4 is just what you are looking for.
- The heritage of the Turner Beta Titanium Series of drivers continues with the Turner T-4 450cc driver.
- The Turner T-4 incorporates the latest technology to optimize distance, direction and trajectory.
- The SP 700 Beta Titanium face offers the latest technology in variable face thickness to maximize drives.
- The next technology allows players to optimize the driver with a weight configuration that is best for each player's game.
- The Turner T-4 arrives with 4 tungsten and aluminum weights already inserted in the driver.
- Two weights each weighing .5 grams and two weights each weighing 4 grams are inserted with each driver.
- The Turner T-4 also comes with additional 6 gram and 8 gram tungsten weights.
- The possibilities are endless in ways golfers can align weights to optimize trajectory and direction.
- Also included with each head and weight package is a tool that is used to remove and insert weights.
Periodically it is recommended that you check the weights to make sure they have not loosened during golfing.
Available in 8, 9, 10, 12, 14 Right Hand
Available in 9, 10, 12 Left Hand
Specifications
| Wood |
|
|
| 1 | 1 |
| Loft(+-1) | 8 | 9 | 10 | 12 | 14 |
| Lie(+-1) | 59 | 59 | 59 | 59 | 59 |
| Weight(+-3) | 201 | 201 | 201 | 201 | 201 |
| Volume(cc) | 450 | 450 | 450 | 450 | 450 |
| Face Height(mm) | 60 | 60 | 60 | 60 | 60 |
Material SP 700 Beta Titanium
Face Angle 1 Degree Closed
Face Thickness 2.8-2.3mm
Diameter .335 Parallel Tip
Bulge/Roll 10"/10"
Hosel Depth 36mm
Color Black
Coned Hosel for Graphite
Turner 518 SL
- The Turner 518 SL (Super Long) Beta Titanium is designed to give players of all levels longer and more accurate drives.
- The new 440cc size makes this club very forgiving and the face will provide the spring effect that you are looking for.
- Also incorporated in the Turner 518 SL is a higher launch angle with less spin for more carry and more roll.
- This head has all the latest features that are propelling the golf ball to new limits! Try one you will see the difference.
Available 8, 9, 11 Right Hand
Specifications
| Wood |
|
|
| 1 | 1 |
| Loft(+-1) | 8 |
| 10 | 11 | 12 |
| Lie(+-1) | 57 | 57 | 57 | 57 | 57 |
| Weight(+-3) | 200 | 200 | 200 | 200 | 200 |
| Volume(cc) | 440 | 440 | 440 | 440 | 440 |
Material SP 700 Beta Titanium Face 9-6-4 Forged Ti Body
Face Angle 1 Degree Closed Face
Face Thickness 2.5-2.8 mm
Face Height 58 mm
Diameter .335 Parallel Tip
Color Black
Hosel Depth 36 mm
Coned Hosel for Graphite
Turner EW-3 Fairway
- The Turner EW-3 fairway woods allow weight to be moved in 3 ports to optimize ball flight and trajectory. The head arrives with one 2 gram and two 4 gram weights preinstalled. Also included with each head are 2 extra weights weighing 6 and 8 grams, along with a tool. Golfers can move the weights to help hit draws, fades or optimize launch conditions. The EW-3 has a slightly shallow face that is easy to hit. The higher launch angle encourages confidence and allows for a soft landing from all types of lies.
- Comparable to the TaylorMade® r7 steel fairway woods
- Each head comes with 1 two gram weight and 2 four gram weights preinstalled along with 2 extra weights weighing 6 grams and 8 grams
- Each head comes with a wrench to remove and tighten weights
| Wood | 3+ | 3 | 5 | 7 | 9 | 11 |
|---|---|---|---|---|---|---|
| Loft(+-1) | 13 | 15 | 18 | 21 | 24 | 27 |
| Lie(+-1) | 58 | 58.5 | 59 | 59.5 | 60 | 60.5 |
| Weight(+-3) | 205 | 210 | 218 | 228 | 228 | 238 |
| Volume (cc) | 160 | 155 | 140 | 135 | 130 | 130 |
| Face Height (mm) | 33 | 33 | 32 | 30 | 30 | 30 |
| Material | 17-4 Stainless Steel |
| Diameter | .335 Parallel Tip |
| Face Angle | Square |
| Hosel Depth | 30mm |
| Color | Black |
Turner T Steel
- Save BIG at Golfideas.com
[TAYLORMADE Cost = $129.99 GOLFIDEAS COST = $42.50]
- The Turner T-Steel Wood Series is versatile. long and very accurate.
- The main feature of this new wood which accomplishes these the factors is the new Turner T-Sole Design.
- Simply put the sole on the Turner T-Steel minimizes the contact with the turf and thus reducing drag which helps players of all levels hit the ball more solid.
- Accuracy and power is also enhanced by having less turf meeting the sole at impact.
- The center of gravity on the Turner T-Steel will produce a mid-high trajectory which is ideal in a driver and fairway wood series.
Specifications
| Wood |
| 3 | 5 | 7 | 9 |
| Loft(+-1) | 10.5 | 15 | 18 | 21 | 24 |
| Lie(+-1) | 56.5 | 58 | 58.5 | 58.5 | 59 |
| Weight(+-3) | 200 | 210 | 220 | 225 | 230 |
| Volume(cc) | 220 | 160 | 150 | 130 | 125 |
| Face Height(mm) | 39 | 33 | 32 | 31 | 31 |
Material 15-5 Stainless Steel
Face Angle Square
Diameter .335 Parallel Tip
Color Black
Coned Hosel for Graphite
Turner Emergency II
- The new Turner Emergency II features two interchangeable weight ports which allow a golfer to change the center of gravity of the club to create a larger draw, promote a more neutral ball flight, or to help create a fade.
- The sole of the Emergency II has also been redesigned to help create more clubhead stability at the moment of impact, which will help to promote greater accuracy and distance.
- Along with the other attributes, the Emergency II also has a lower center of gravity to help get the ball in the air.
- The Turner Emergency II is a great improvement in the world of hybrid clubs that are becoming more and more common in golf bags of golfers of all levels.
Available in 1, 2, 3, 4, 5 Right Hand
Available in 1, 2, 3, 4, 5 Left Hand
Specifications
| Club |
| 2 | 3 | 4 | 5 |
| Loft(+-1) | 16 | 19 | 22 | 25 | 28 |
| Lie(+-1) | 58 | 59 | 59.5 | 60 | 60.5 |
| *Weight(+-3) | 235 | 240 | 245 | 250 | 255 |
| Face Height(mm) | 35 | 35 | 35 | 35 | 35 |
*- With 10 grams of weight installed
Material 17-4 Stainless Steel
Diameter .370 Parallel Tip
Hosel Depth 31mm
Color Black/Silver
Face Angle Square
Pre Coned For Graphite
Ferrule is Required
Included with each head is an 2, 7, 12 gram weight and weight tool. Two 5 gram weights comes pre-installed.
Turner Emergency Midsize
- This is one of the best clubs to come out on the market since Golfideas was founded.
- Having troubles being accurate with your 3wd shots??
- Having trouble making solid contact with your long irons??
- The Turner "Emergency Midsize" is the answer for that problem in your game.
If you struggle to hit long irons the Turner "Emergency" Series is the perfect solution. This new design is easier to hit and longer than traditional 1. 2. 3 and 4 irons. This series has a high moment of inertia and a low center of gravity. This will produce a higher and softer shot than a traditional iron. The Turner Emergency will be around 5-7 yards longer than a normal iron with the same loft. The Turner Emergency Series also incorporates a dual sole design which will help players of all abilities hit the ball from any area on the course. This is a great design for all levels of players.
REQUIRES A .370 PARALLEL TIP IRON SHAFT
Specifications
| Club | 1 | 2 | 3 | 4 |
| Loft | 16 | 19 | 22 | 25 |
| Lie | 58 | 59 | 59 | 59.5 |
| 205 | 210 | 215 | 220 |
Material 17-4 Stainless Steel Diameter .370 Parallel Tip Face Height 34mm Finish Silver/Black Pre Coned For Graphite |
Turner T-4 Fairway Headcover
- Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
- These high quality Turner T-4 Fairway headcovers (For all Turner Steel Models) will do the job and they will add flavor to any golf bag.
- Fits all Turner Steel Woods. Includes tags for 3wd, 5wd, 7wd, 9wd and 11wd.
Turner T-5 Headcover
- Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
- This high quality Turner T-5 Beta Titanium headcover will do the job and will add flavor to any golf bag.
- Fits up to a 460cc size driver and looks great on our Turner T-5 Beta Titanium Driver.
Turner T-4 Headcover
- Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
- This high quality Turner T-4 Beta Titanium headcover will do the job and will add flavor to any golf bag.
- Fits up to a 460cc size driver and looks great on our Turner T-4 Beta Titanium Driver.
Turner Titanium Headcover
- Don't take chances with damaging your woods by not using a long sleeved and graphite safe headcover.
- This high quality Turner Beta Titanium headcover will do the job and will add flavor to any golf bag.
- Fits up to a 460cc size driver and looks great on any of our Turner Beta Titanium Drivers.
